Lustiner
Panier d'achat
Votre panier est vide

Poste de Sécurité Microbiologique PSM - Classe II / type A2 - Mod. S@feflow™ Cruma®

Dim°: L.180 x P.60 x H.65 cm. Inclus : filtres absolu H-14 +Kit UV germicide + Piètement

Référence : 1447250

Unité de vente : Pièce

Poste de sécurité microbiologique de classe II type A2, pour la protection de l''opérateur, de l''environnement et du produit. Modèle S@feflow™ conçu pour minimiser les risques inhérents au travail avec des agents biologiques des classes 1, 2 et 3. Le PSM S@feflow™ protège tant le produit que l'opérateur et l'environnement. Conforme aux normes EN 12469 certifié TÜV et LNE.

Descriptifs et caractéristiques techniques :
Il s'agit d'un poste de sécurité biologique sous flux laminaire vertical avec recirculation de 70 % de l'air Classe II A équipée de deux étapes de filtrage HEPA.
-    Filtrage HEPA de flux laminaire vertical assurant la protection du produit,
-    Filtrage HEPA de l'air expulsé à l'extérieur pour garantir la protection de l'environnement,
-    Filtre d'impulsion, filtre d'expulsion et ventilateur accessibles depuis la partie frontale,

Eléments complémentaires de sécurité :
-    La lampe UV est enclenchée avec les ventilateurs,
-    La lampe UV se déconnecte automatiquement, en ouvrant la partie frontale,
-    Possibilité de protéger le panneau de contrôle contre les manipulations non autorisées,
-    Alarme optique et acoustique de débit d'extraction ou de vitesse du flux laminaire insuffisant,
-    Alarme, avertissant dès lors que la porte n'est pas fermée pendant l'utilisation du PSM,
Les ventilateurs d''impulsion et d''expulsion fournissent un système spécial de sécurité : en cas d''arrêt du ventilateur d'expulsion, celui d''impulsion s'arrête en même temps ; en cas d''arrêt du ventilateur d'impulsion, celui d''expulsion augmente de vitesse, pour maintenir les conditions de dépression dans la zone de travail. Dans tous les cas, la sécurité de l''utilisateur et celle de l''environnement sont garanties au maximum.

Ecran alphanumérique tactile, fournissant les données suivantes :
- Identification des utilisateurs par trois codes dissociables (opérateur, superviseur et calibrateur),
- Indication et contrôle permanent de saturation de filtre HEPA,
- Indication et contrôle permanent du cycle automatique de la lampe UV,
- Vitesse du flux laminaire, en m/s,
- Température de la zone de travail, en °C,
- Date du dernier contrôle entretien.

Support meuble en acier laminé, laqué et séché au four. Partie frontale rabattable construite en verre laminé et sécurisé, avec élévateurs à pistons pneumatiques. Caisson intérieur en acier inoxydable 304, avec surface de travail segmentée en 3 parties. Deux étapes de filtrage HEPA H14 à efficacité 99,999 % pour particules supérieures à 0,3 µm.
-    Plan de travail en acier inoxydable 304,
-    Filtres HEPA H14 (particules > 0,3 µm) : 99,995 % (certifiés et testés selon normes EN 1822-1 et EN 13091:1999),
-    Eclairage : > 1200 lux,
-    Vitesse du flux laminaire entrant : 0,50 m.s-1,
-    Niveau sonore (silencieux) : < 54 dB(A),
-    Puissance : 1200 Watts,
-    Dimensions internes utiles (H x L x P, en mm) : 650 x 1183 x 600,
-    Dimensions externes (sans piètement) (H x L x P, en mm) : 1455 x 1360 x 792,
Alimentation : 230 Volts / 50 Hz, monophasée,
Volume brut monté : ~ 1,57 m3,
Poids brut / brut taxable (sans piètement) : ~ 240 / 260 kg.

-------------------------------------------------------------------------------------------------------

Main Specifications:

1. Fully EN12469 certified (by TÜV Hamburg and LNE Paris)
2. Sloped front for highest operational comfort
3. Air-and aerosol-tight electrical sliding sash with smart functions. User friendly swing-out feature for effective cleaning and sanitation of the inner glass surface
4. Microprocessor control with following main specs:
 a. Large screen monitor. Easy to read. Multi-functional display. Icons to access the different functions. Permanent display of main parameters. Message display (standard functions and emergency situations)
 b. Three levels of PIN codes Operator, Supervisor and Calibration
 c. Accessory functions Choice of five languages, time and date display, SW version display, entered PIN level display, etc.
 d. Fully automatic UV light cycle
 e. Sliding sash window with smart control (opens/closes automatically when required during certain automatic cycles such as UV positioning, automatic fumigation, etc). The window can be also operated manually directly from the keyboard. Special safety system build in to prevent accidents
 f. Permanent monitoring of HEPA filters life span
 g. Permanent monitoring of UV light life span
 h. Direct maintenance and re-calibration accessible from the key board no need of external laptops neither of opening the electrical panel for normal calibration procedures
 i. Alarms. Multilevelalarms, with redundancy functions (direct speed measurement and position of the window checked by double microswitch). Permanent measurement of total flow and exhaust flow by vane anemometer(s)
 j. Multitask multi-pin plug build as standard option, for monitoring of the UV cycle and of the automatic sterilisation cycle
5. Very silent and quite operation <54 dB(A) due to special soft plenum design and highly vibration-free suspensions of the fan(s)
6. Utilities plug-in from the top. Standard gas tap, power point and vacuum tap are connectable from the top of the cabinet. Consequently the overall width footprint of the cabinet is considerably reduced
7. Automatic Sterilisation Cycle. (Optional kit: Formalin vaporiser and neutralising activated carbon filter exhaust kit)
Fully automatic, self-operating fumigation cycle, operated by the microprocessor. Cycle is based on following steps (times for each step can be set according to a precise protocol that the user can validate):
 a. Vaporising (form aldehyde is fumigated in the working chamber)
 b. Diffusion (form aldehyde is circulated in the plenum and through the Hepafilters)
 c. Contact time (for proper sterilisation effect)
 d. Purge with automatic control of the residence time of the exhausted air through the activated carbon filter. This allows the filter to have at any time the same efficiency, independently from the concentration of formaldehyde in the exhausted air. The front window is opened and the voltage applied to the fan is automatically controlled in order to optimise residence time
8. Five different exhaust kit options to satisfy the most stringent needs:
 a. Passive transition adapter for short ducting
 b. remote external fan with or without additional filter
 c. Thimble for multiple connection configurations with central exhaust
 d. Activated charcoal filter automatic fumigation
 e. Integraldual HEPA exhaust filter
9. Recessed exhaust filter configuration to maximize distance from HEPA filter surface to laboratory ceiling, even with dual exhaust filter installed
10. Data Logger Kit. This kit is used for downloading operational data relevant to several main operational parameters and can be operated by a total of up to 10 users on the same cabinet
11. UPS Emergency Power Supply Interactive emergency power supply for the safest power failure management of the Cabinet. In case of main power failure this device allows an adequate exit time for the operator in order to complete any unfinished tasks, and subsequently closes the front window and shotdown the cabinet automatically.
Pre-failure operating conditions are resumed when power returns

Mechanical and Funcional Specifications:

• Sloped front design for the highest operational comfort.
Sloped back side of the working chamber for the best down flow distribution (cabinet carcass EN 12298 tested and certified for air tightness)
• Stainless Steel 304 internal surfaces with 2B finishing (including spillage tray). Perforated work surface (3 sections) and special designed front grill. Solid work surface available
• Stainless steel 304 spillage sump
• Electrically operated sliding multilayer safety glass window; swing out features for cleaning.
• Utilities inlets from the top of the cabinet.
• Recessed exhaust Hepa filter
• H14 class High Efficiency Particulate Airfilters guaranteed with 99.995% efficiency on 0.3 m icron particles (most penetrating particle diameter) (EN 1822-1 and EN 13091:1999 tested and certified)
• Exhaust and Main Filters are equipped with a micromesh membrane located downstream which acts as airspeed equalizer expansion plenum, as well as a clear indicator of filter damages.
• Filter change and maintenance from the front cabinet.
• Exhaust transitions easily installable.
• Three PIN code levels (Operator, Supervisor, Calibration)
• Programmable UV light cycle.
• Digital HEPA filter life span indicator
• Digital UV lamp life span indicator
• Automatic re-set of original working conditions in case of power failure
• Self calibration cycle performed at start-up
• High speed rinse and set up cycle perform ed, before reaching the SAFE operating mode
• Soft touch control with keys for standard service utilities
• nterconnected UV and fluorescentlights
• Exhaust and recirculating flow rates ensure 25 air changes/min in the working area (30% 70% split)
• Front barrier air speed ≥ 0.5m t/sec
• Aperture protection Factor (Apf) ≥ 2x 10 exp5 (KI-discus test)
• Cleanability Index CC grade. (EN 12296 tested and certified)
• Light intensity on work surface >900 lux
• Noiselevel ≤ 54 dB(A)1.2m tModel (ISO 11201, ISO 4871 and ISO EN 3744 tested and certified)
• Work surface displacement (vibration) <0.005 mm RMS between 20 Hz and 20,000 Hz (ISO5349 tested+certified)
• 230 V, 50 Hz
• Max power (for eachpower point) 3 Amps
• CE certification according to Machinery Directive 89/392/EEC, 91/368/EEC, 93/44/EEC 93/68/EEC.

 

Poids 330 Kg
Volume 4,51 m³
Largeur 0,95 m   (95 cm)
Longueur 2,16 m
Hauteur 2,2 m
Les dimensions, le poids et le volume sont bruts (emballage inclus)
Portail collaboratif Réalisé par Ovidentia, Ovidentia est une marque déposée par Cantico. Gestion